Investigation of emission plane control in GaInN/GaN multiple-quantum shells for efficient nanowire-based LEDs.

Significant attention has been directed toward core-shell GaInN/GaN multiple-quantum shell (MQS) nanowires (NWs) in the context of high-efficiency micro light-emitting diodes (micro-LEDs). These independent three-dimensional NWs offer the advantage of reducing the impact of sidewall etching regions. Furthermore, the emitting plane on the sidewalls demonstrates either nonpolar or semipolar orientation, while the dislocation density is exceptionally low. In this study, we assessed how changes in the NW morphology are affected by GaInN/GaN superlattice (SL) structures grown at varying growth temperatures, as well as control of the emission plane via the p-GaN shell and emission sizes. The SL growth rate was enhanced at elevated growth temperatures, accompanied by the shrinkage of the (0001)-plane and expansion of the (11̄01)-plane on the NWs. The samples exhibited a higher light output when the SLs were grown at elevated temperatures compared to those grown with lower temperatures. A similar trend was observed for the samples with a gradual temperature transition during the growth. These findings indicate that the dimensions of the (0001)-plane can be controlled through SL growth, which in turn influences the emission properties of NW-LEDs. In addition, the emission properties of NW-LEDs with different growth time p-GaN shells and different emission sizes were investigated. Based on the NW-LED characteristics, it was revealed that the weak emission of the (0001)-plane was the dominant factor for the limited light output, and the most effective way to realize high efficiency devices is to suppress current injection into the apex or minimize the grown (0001)-plane region. Overall, it is one promising way to control the emission planes of NWs, which holds significant relevance for the potential application of NW-LEDs in the realm of micro-LEDs.

Simplified numerical modeling for Fano interference-induced asymmetric light reflectance effect using equivalent medium theory.

Localized surface plasmons exhibit promising capabilities in optoelectronic devices. In most cases, the metal nanoparticle arrays are located on interfaces or inside optical cavities. Fano interferences have been observed and explained via the interference between the waves generated by the localized surface plasmon and dielectric interfaces. Conventionally, these Fano interferences are modeled using the modified Fresnel equation. However, certain issues persist in the fundamental physics or in the numerical calculation process. Here, we adopt the equivalent medium theory (Maxwell-Garnett theory, MGT) to calculate and elucidate Fano interferences in different structures, in the region comprising nanoparticle arrays and dielectrics equivalent to a homogeneous layer of media via the mean field theory. Using this method, the Fano interference can be modeled by mixing different materials, i.e., metals and dielectrics in these cases. Furthermore, a multiple-layered equivalent medium theory is proposed to significantly improve the scalability of this simplified numerical method. In other words, this method can be easily extended to nanoparticles with different shapes, sizes, and materials; in addition, it exhibits robust practicability. Compared with the modified Fresnel equation and finite-difference time-domain methods, this MGT-based method can effectively minimize the calculation process, which is beneficial to the prospective application of plasmon photonics.

Superlattice-Induced Variations in Morphological and Emission Properties of GaInN/GaN Multiquantum Nanowire-Based Micro-LEDs.

Core-shell GaInN/GaN multiquantum shell (MQS) nanowires (NWs) are gaining great attention for high-efficiency micro-light-emitting diodes (micro-LEDs) owing to the minimized etching region on their sidewall, nonpolar or semipolar emission planes, and ultralow density of dislocations. In this study, we evaluated the changes in NW morphologies and the corresponding device properties induced by GaInN/GaN superlattice (SL) structures. The cathodoluminescence intensities of the samples with 20 and 40 pairs of SLs were about 2.2 and 3.4 times higher, respectively, than that of the sample without SLs. The high-resolution scanning transmission electron microscopy (STEM) inspection confirmed that the high growth temperature of SLs prevented growth in the semipolar plane region close to the n-GaN core. A similar phenomenon was also observed for the GaN quantum barriers of the semipolar MQS region under a high growth temperature of 810 °C. This phenomenon was ascribed to the passivation of the semipolar plane surface by hydrogen atoms and the high probability of decomposition through NH3 or N-H-related bonds. Although no clear SL grew on the semipolar plane near the n-core region, the top area of the nonpolar plane SL was expected to adequately suppress the point defects propagating from the n-GaN core to the semipolar plane MQS. The electroluminescence (EL) spectra and light output curves demonstrated a clear enhancement of more than 3-folds compared to the fabricated micro-LEDs without SL structures, which was associated with the improved crystalline quality of the MQS and enlarged area of the semipolar planes. Moreover, by increasing the growth time of GaN quantum barriers, the EL emission intensity of the micro-LED devices exhibited a 4-fold improvement owing to the reduced carrier overflow in the thickened GaN barriers on the semipolar (11̅01) planes. Thus, the results verified the possibility of realizing highly efficient NW-based micro-LEDs by optimizing the NW morphology using SL structures.

Morphology Control and Crystalline Quality of p-Type GaN Shells Grown on Coaxial GaInN/GaN Multiple Quantum Shell Nanowires.

The morphology and crystalline quality of p-GaN shells on coaxial GaInN/GaN multiple quantum shell (MQS) nanowires (NWs) were investigated using metal-organic chemical vapor deposition. By varying the trimethylgallium (TMG) flow rate, Mg doping, and growth temperature, it was verified that the TMG supply and growth temperature were the dominant parameters in the control of the p-GaN shape on NWs. Specifically, a sufficiently high TMG supply enabled the formation of a pyramid-shaped NW structure with a uniform p-GaN shell. The ratio of the growth rate between the c- and m-planes on the NWs was calculated to be approximately 0.4545. High-angle annular dark-field scanning transmission electron microscopy characterization confirmed that no clear extended defects were present in the n-GaN core and MQS/p-GaN shells on the sidewall. Regarding the p-GaN shell above the c-plane MQS region, only a few screw dislocations and Frank-type partial dislocations appeared at the interface between the serpentine c-plane MQS and the p-GaN shell near the tips. This suggested that the crystalline quality of the MQS structure can trigger the formation of screw dislocations and Frank-type partial dislocations during the p-GaN growth. The growth mechanism of the p-GaN shell on NWs was also discussed. To inspect the electronic properties, a prototype of a micro light-emitting diode (LED) with a chip size of 50 × 50 µm2 was demonstrated in the NWs with optimal growth. By correlating the light output curve with the electroluminescence spectra, three different emission peaks (450, 470, and 510 nm) were assignable to the emission from the m-, r-, and c-planes, respectively.

Crystal Growth and Characterization of n-GaN in a Multiple Quantum Shell Nanowire-Based Light Emitter with a Tunnel Junction.

Here, we systematically investigated the growth conditions of an n-GaN cap layer for nanowire-based light emitters with a tunnel junction. Selective-area growth of multiple quantum shell (MQS)/nanowire core-shell structures on a patterned n-GaN/sapphire substrate was performed by metal-organic vapor phase epitaxy, followed by the growth of a p-GaN, an n++/ p++-GaN tunnel junction, and an n-GaN cap layer. Specifically, two-step growth of the n-GaN cap layer was carried out under various growth conditions to determine the optimal conditions for a flat n-GaN cap layer. Scanning transmission electron microscopy characterization revealed that n++-GaN can be uniformly grown on the m-plane sidewall of MQS nanowires. A clear tunnel junction, involving 10-nm-thick p++-GaN and 3-nm-thick n++-GaN, was confirmed on the nonpolar m-planes of the nanowires. The Mg doping concentration and distribution profile of the p++-GaN shell were inspected using three-dimensional atom probe tomography. Afterward, the reconstructed isoconcentration mapping was applied to identify Mg-rich clusters. The density and average size of the Mg clusters were estimated to be approximately 4.3 × 1017 cm-3 and 5 nm, respectively. Excluding the Mg atoms contained in the clusters, the remaining Mg doping concentration in the p++-GaN region was calculated to be 1.1 × 1020 cm-3. Despite the lack of effective activation, a reasonably low operating voltage and distinct light emissions were preliminarily observed in MQS nanowire-based LEDs under the optimal n-GaN cap growth conditions. In the fabricated MQS-nanowire devices, carriers were injected into both the r-plane and m-plane of the nanowires without a clear quantum confinement Stark effect.

Identification of multi-color emission from coaxial GaInN/GaN multiple-quantum-shell nanowire LEDs.

Multi-color emission from coaxial GaInN/GaN multiple-quantum-shell (MQS) nanowire-based light-emitting diodes (LEDs) was identified. In this study, MQS nanowire samples for LED processes were selectively grown on patterned commercial GaN/sapphire substrates using metal-organic chemical vapor deposition. Three electroluminescence (EL) emission peaks (440, 540, and 630 nm) were observed, which were primarily attributed to the nonpolar m-planes, semipolar r-planes, and the polar c-plane tips of nanowire arrays. A modified epitaxial growth sequence with improved crystalline quality for MQSs was used to effectively narrow the EL emission peaks. Specifically, nanowire-based LEDs manifested a clear redshift from 430 nm to 520 nm upon insertion of AlGaN spacers after the growth of each GaInN quantum well. This demonstrates the feasibility of lengthening the EL emission wavelength since an AlGaN spacer can suppress In decomposition of the GaInN quantum wells during ramping up the growth temperature for GaN barriers. EL spectra showed stable emission peaks as a function of the injection current, verifying the critical feature of the non-polarization of GaN/GaInN MQSs on nanowires. In addition, by comparing EL and photoluminescence spectra, the yellow-red emission linked to the In-fluctuation and point defects in the c-plane MQS was verified by varying the activation annealing time and lowering the growth temperature of the GaInN quantum wells. Therefore, optimization of MQS nanowire growth with a high quality of c-planes is considered critical for improving the luminous efficiency of nanowire-based micro-LEDs/white LEDs.

Correlation between Optical and Structural Characteristics in Coaxial GaInN/GaN Multiple Quantum Shell Nanowires with AlGaN Spacers.

High crystalline quality coaxial GaInN/GaN multiple quantum shells (MQSs) grown on dislocation-free nanowires are highly in demand for efficient white-/micro-light-emitting diodes (LEDs). Here, we propose an effective approach to improve the MQS quality during the selective growth by metal-organic chemical vapor deposition. By increasing the growth temperature of GaN barriers, the cathodoluminescent intensity yielded enhancements of 0.7 and 3.9 times in the samples with GaN and AlGaN spacers, respectively. Using an AlGaN spacer before increasing the barrier temperature, the decomposition of GaInN quantum wells was suppressed on all planes, resulting in a high internal quantum efficiency up to 69%. As revealed by scanning transmission electron microscopy (STEM) characterization, the high barrier growth temperature allowed to achieve a clear interface between GaInN quantum wells and GaN quantum barriers on the c-, r-, and m-planes of the nanowires. Moreover, the correlation between the In incorporation and structure features in MQS was quantitatively assessed based on the STEM energy-dispersive X-ray spectroscopy mapping and line-scan profiles of In and Al fractions. Ultimately, it was demonstrated that the unintentional In incorporation in GaN barriers was induced by the evaporation of predeposited In-rich particles during low-temperature growth of GaInN wells. Such residual In contamination was sufficiently inhibited by inserting low Al fraction (∼6%) AlGaN spacers after each GaInN well. During the growth of AlGaN spacers, AlN polycrystalline particles were deposited on the surrounding dummy substrate, which suppressed the evaporation of the predeposited In-rich particles. Thus, the presence of AlGaN spacers certainly improved the uniformity of In fraction through five GaInN quantum wells and reduced the diffusion of point defects from n-core to MQS active structures. The superior coaxial GaInN/GaN MQS structures with the AlGaN spacer are supposed to improve the emission efficiency in white-/micro-LEDs.

Voltage-Controlled Anodic Oxidation of Porous Fluorescent SiC for Effective Surface Passivation.

This study investigated the fabrication of porous fluorescent SiC using a constant voltage-controlled anodic oxidation process. The application of a high, constant voltage resulted in a spatial distinction between the porous structures formed inside the fluorescent SiC substrates, due to the different etching rates at the terrace and the large step bunches. Large, dendritic porous structures were formed as the etching process continued and the porous layer thickened. Under the conditions of low hydrofluoric acid (HF) concentration, the uniformity of the dendritic porous structures through the entire porous layer was considerably improved compared with the conditions of high HF concentration. The resulting large uniform structure offered a sizable surface area, and promoted the penetration of atomic layer-deposited (ALD) Al2O3 films (ALD-Al2O3). The emission intensity in the porous fluorescent SiC was confirmed via photoluminescence (PL) measurements to be significantly improved by a factor of 128 after ALD passivation. With surface passivation, there was a clear blueshift in the emission wavelength, owing to the effective suppression of the non-radiative recombination rate in the porous structures. Furthermore, the spatial uniformity of emitted light was examined via PL mapping using three different excitation lasers, which resulted in the observation of uniform and distinctive emissions in the fluorescent SiC bulk and porous areas.

Development of Monolithically Grown Coaxial GaInN/GaN Multiple Quantum Shell Nanowires by MOCVD.

Broadened emission was demonstrated in coaxial GaInN/GaN multiple quantum shell (MQS) nanowires that were monolithically grown by metalorganic chemical vapor deposition. The non-polar GaInN/GaN structures were coaxially grown on n-core nanowires with combinations of three different diameters and pitches. To broaden the emission band in these three nanowire patterns, we varied the triethylgallium (TEG) flow rate and the growth temperature of the quantum barriers and wells, and investigated their effects on the In incorporation rate during MQS growth. At higher TEG flow rates, the growth rate of MQS and the In incorporation rate were promoted, resulting in slightly higher cathodoluminescence (CL) intensity. An enhancement up to 2-3 times of CL intensity was observed by escalating the growth temperature of the quantum barriers to 800 °C. Furthermore, decreasing the growth temperature of the quantum wells redshifted the peak wavelength without reducing the MQS quality. Under the modified growth sequence, monolithically grown nanowires with a broaden emission was achieved. Moreover, it verified that reducing the filling factor (pitch) can further promote the In incorporation probability on the nanowires. Compared with the conventional film-based quantum well LEDs, the demonstrated monolithic coaxial GaInN/GaN nanowires are promising candidates for phosphor-free white and micro light-emitting diodes (LEDs).

Temperature-dependent photoluminescence properties of porous fluorescent SiC.

A comprehensive study of surface passivation effect on porous fluorescent silicon carbide (SiC) was carried out to elucidate the luminescence properties by temperature dependent photoluminescence (PL) measurement. The porous structures were prepared using an anodic oxidation etching method and passivated by atomic layer deposited (ALD) Al2O3 films. An impressive enhancement of PL intensity was observed in porous SiC with ALD Al2O3, especially at low temperatures. At temperatures below 150 K, two prominent PL emission peaks located at 517 nm and 650 nm were observed. The broad emission peak at 517 nm was attributed to originate from the surface states in the porous structures, which was supported by X-ray photoelectron spectra characterization. The emission peak at 650 nm is due to donor-acceptor-pairs (DAP) recombination via nitrogen donors and boron-related double D-centers in fluorescent SiC substrates. The results of the present work suggest that the ALD Al2O3 films can effectively suppress the non-radiative recombination for the porous structures on fluorescent SiC. In addition, we provide the evidence based on the low-temperature time-resolved PL that the mechanism behind the PL emission in porous structures is mainly related to the transitions via surface states.

Effect of AlGaN undershell on the cathodoluminescence properties of coaxial GaInN/GaN multiple-quantum-shells nanowires.

Coaxial GaInN/GaN multiple-quantum-shells (MQSs) nanowires (NWs) were grown on an n-type GaN/sapphire template employing selective growth by metal-organic chemical vapour deposition (MOCVD). To improve the cathodoluminescence (CL) emission intensity, an AlGaN shell was grown underneath the MQS active structures. By controlling the growth temperature and duration, an impressive and up to 11-fold enhancement of CL intensity is achieved at the top area of the GaInN/GaN MQS NWs. The spatial distribution of Al composition in the AlGaN undershell was assessed as a function of position along the NW and analysed by energy-dispersive X-ray measurement and CL characterisation. By introducing an AlGaN shell underneath GaInN/GaN MQS, the diffusion of point defects from the n-core to MQS is effectively suppressed because of the lower formation energy of vacancies-complexes in AlGaN in comparison to GaN. Moreover, the spatial distribution of Al and In was attributed to the insufficient delivery of gas precursors to the bottom of the NWs and the anisotropy diffusion on the nonpolar m-planes. This investigation can shed light on the effect of the AlGaN undershell on improving the emission efficiency of NW-based white and micro-light-emitting diodes (LEDs).

White Light Emission from Fluorescent SiC with Porous Surface.

ABSTARCT: We report for the first time a NUV light to white light conversion in a N-B co-doped 6H-SiC (fluorescent SiC) layer containing a hybrid structure. The surface of fluorescent SiC sample contains porous structures fabricated by anodic oxidation method. After passivation by 20 nm thick Al2O3, the photoluminescence intensity from the porous layer was significant enhanced by a factor of more than 12. Using a porous layer of moderate thickness (~10 µm), high-quality white light emission was realized by combining the independent emissions of blue-green emission from the porous layer and yellow emission from the bulk fluorescent SiC layer. A high color rendering index of 81.1 has been achieved. Photoluminescence spectra in porous layers fabricated in both commercial n-type and lab grown N-B co-doped 6H-SiC show two emission peaks centered approximately at 460 nm and 530 nm. Such blue-green emission phenomenon can be attributed to neutral oxygen vacancies and interface C-related surface defects generated dring anodic oxidation process. Porous fluorescent SiC can offer a great flexibility in color rendering by changing the thickness of porous layer and bulk fluorescent layer. Such a novel approach opens a new perspective for the development of high performance and rare-earth element free white light emitting materials.

A CMOS-compatible approach to fabricate an ultra-thin germanium-on-insulator with large tensile strain for Si-based light emission.

We present a method to introduce a large biaxial tensile strain in an ultra-thin germanium-on-insulator (GOI) using selective oxidation of SiGe epilayer on silicon-on-insulator (SOI) substrate. A circular patterned Si0.81Ge0.19 mesa on SOI substrate with the sidewall protected by Si3N4 or SiO2 is selectively oxidized to generate local 12 nm GOI with high crystal quality, which shows enhanced photoluminescence due to large tensile strain. Direct band photoluminescence peak significantly shifts to longer wavelength as compared to that from bulk Ge due to a combination of strain-induced band gap reduction and quantum confinement effect.